Guangzhou Optical Bridge Communication Equipment Co., Ltd.
Main products:Video Optical Transmission,Tiber Optical Media Converter,Ethernet Over E1 Converter,Tiber PCM Multiplexer,PDH Multiplexer
Products
Contact Us
  • Contact Person : Ms. xiao yanqun
  • Company Name : Guangzhou Optical Bridge Communication Equipment Co., Ltd.
  • Tel : 86-020-82319302,13760887412
  • Fax : 86-020-82329792
  • Address : Guangdong,Guangzhou,NO.393 MID ZhongShan Avenue,TianHe District
  • Country/Region : China
  • Zip : 510660

10/100Base-Tx fast ethernet over e1 converter

10/100Base-Tx fast ethernet over e1 converter
Product Detailed
1.E1 supports two working modes:Framed and Unframed 2.Ethernet interface supports 10/100Mbps half/full-duplex 3.Built-in BERT
                              GQ1001B 10/100Base-TX Ethernet over E1 Protocal Converter
Description 
        

             GQ1001B Ethernet Over E1 Interface Converter provides the user with Ethernet over E1 conversion enabling the user to transport Ethernet data over an E1 link.

       GQ1001B is an Ethernet extension device utilizing TDM telecom infrastructure( the telecom networks of E1s,or of PDH,SDH and E1/E3/SDH microwave etc. Carrying E1s). It converts the Ethernet data into E1 frame format for transmission over the existing TDM(E1)links and then re-converts the E1 back into Ethernet data the far-end terminal,to bridge two Ethernet LANs over the existing E1-based telecom network. The device can effectively utilize the redundant bandwidth of telecom operators' existing TDM network to transport Ethernet data with low investment.

    The equipment be always installed and used in pairs, with one terminal being installed at either end of the network.

Features

lThe maximum transmission rate of Ethernet data over E1 links is 2.048Mbit/s

lE1 supports two working modes of transparent transmission: framed(CCS/PCM31) and unframed

lAllow transparent transmission of super-long frames in 2024bytes and supports Ethernet switchers with VLAN function

lEthernet interface supports 10/100Mbps half/full-duplex, automatic negotiation

lAvailable with MAC address list filtration, learning and updating functions

lAvailable with auto-resetting function. When network port stops receiving or sending data about 8seconds, the auto-resetting circuit will be able to start automatically, to reduce and maintain workload for the system

lSupports two working modes : internal clock and external clock

lSupports RLOOP(E1 port external loop-back)

lE1 channel support built-in BERT(Bit Error Rate Test) function

lSupport flux control based on the 802.3x

lProvide a management interface, can be flexibly config the device

lPlug and Play

Typical Application Diagram

  

                                         Application Diagram of FE1/10(100)Base-T Interface Converter

Specifications

E1 Interface

Impendence : 75Ohm/120Ohm

Line Rate: E1(2.048Mbps)

Line Code: HDB3, compliance with ITU-T G.703

Electric features of digital interface:compliant with ITU-T G.703 recommendations

Jitter transfer performance: compliant with ITU-T G.823 recommendations

Physical Connetors: RJ 45 or BNC coaxial

Ethernet Interface

Number of Ports: 1

Speed: 10/100Mbps full/half duplex auto-negotiation

Standards Compliance: compliance with IEEE-802.3u

Physical Connetors: RJ45

Environmental

Operating Temperature: 0 to 70°C (32 to 158F) 5 to 95% RH

Storage Temperature:   -40 to 85°C (40 to 185F) 95% RH

Power Requirements

Power Input: AC /DC optional

DC power: DC-48V (-36V~-72V )

AC power: AC220V (185~265V)

Power Consumption: <5 Walt

Mechanical Specifications

Dimensions: 138 mm(Weight)×103 (height)×32 (depth)

Weight: 2.32kg/Units

 

10/100Base-Tx fast ethernet over e1 converter



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.